Brochures-WEIGHING SCALE OPERATION MANUAL

Details:

ACS SERIES WEIGHING SCALE

 

OPERATION MANUAL

 

 

ACS series weighing scale operation manual

 

 

Function keys

Turn on/tare

Turn off

Mode(Select different weighing unit)

 

 

Parameter setting

1.       Turn on the scale

2.       Press MODE one time before the screen displays <zero>.

The screen will display a set of data which is <OFFSET VALUES>.

3.       Press    to select the parameter.

4.Press    to select different settings.

A.Backlight

Backlight on                    Backlight off

B.Auto shutdown

Auto shutdown on               Auto shutdown off

C.Weighing unit select

Weighing unit select allowed    Weighing unit select locked

D.Accurancy setting

Division 1/3000              Division 1/6000 or 1/7500

Division 1/15000              Division 1/30000

 

5.Press   to finish parameter setting.

Battery Status:

LCD Type:You can directly see the battery status on the screen when the scale is on.

(E.g .       four battery gauge,      two battery gauge)

LCD/LED Type:when the scale is on,press    and hold for 1s and then youcan see the

battery status,e.g,   indicates four battery level,   indicates two battery level.

 

 

Alam

Warning Message	Cause
The screen displays ----overweight	Overtop the scope of weight(over 9 divisions)
The screen displays <Err>	The gross weight beyond the max weight of sensor
The battery mark         flashing Or LED low power light lights	Not enough power

 

 

Charge notice

The scale have battery protection function.When the power is low,

the scale will be turned off automatically.If do not charge in time,

the scale will automatically  shutdown in 30s after restarted.When

you charge the battery,please connect the adaptor cable(DC9V/5mA)

with the scale socket,the pilot light will light up.(If the scale is not

intened  to usefor long time.Please charge the battery every three

months).It will need 8-10 hours to full charge the battery. You can

see the charging  status according to the charge pilot light.

Color of the pilot light	Red	Orange	Green
Charging percentage	50% ~80%	80% ~90%	90%~ 100%

 

 

 

 

Attention

1.When using the scale, please locate the scale on a flat surface,avoid shaking,

dropping,or otherwise shocking the scale.Keep the scale away from water,and

do not let water flow into the scale.Please use wet cloth to clean the machine surface.

 

2.Please charge the battery when the indicator shows low power.If the scale is

 not intended to use for long time,please take out the battery in case of damage.

 

3.Please place the scale under the temperature of 0C-40C to avoid lengthy exposure to

extreme heat or cold.